Inductive proximity switches offer almost ideal conditions: non-contact operation free from any wear and tear, high switching frequencies and accuracy. In addition, they are insensitive to vibration, dust and moisture. Inductive sensors detect all metals without contact. These are used together with a visual position indicator, Puck.
|
 |
Target puck Mounting Kit
For mechanical interfaces to ISO 5211 (DIN 3337) on peumatic actuators or manually-operated valves. 3 possible switching flag positions. This kit is required for all inductive Limit Switches. |
 |
IFM type IN 0108, 20-250V AC/DC
IND2004DABOA/BS-200-K, Inductive sensor, Connector, Sensing range 4 mm, non-flush mountableon-flush mountable
IFM type IN 0109, 20-250V AC/DC
IND2004DABOA, Inductive sensor, Cable, Sensing range 4 mm, non-flush mountable
IFM type IN 0110, 20-250V AC/DC
IND2004DABOA, Inductive sensor, Cable, Sensing range 4 mm, non-flush mountable
IFM type IN 5225, 10-36V DC PNP
IND3004DBPKG/US, Inductive sensor, Connector, Sensing range 4 mm, non-flush mountable
IFM type IN 5251, 10-36V DC PNP
IND3004DBPKG, Inductive sensor, Cable, Sensing range 4 mm, non-flush mountable
IFM type IN 5285,10-36V DC PNP
IND3004DBPKG/BS, Inductive sensor, Connector, Sensing range 4 mm, non-flush mountable
IFM type IN 5224, 10-36V DC PNP/NPN
IND2004DARKG/US, Inductive sensor, Connector, Dual sensor
IFM type IN 5290, 10-36V DC PNP/NPN
IND2004DARKG, Inductive sensor, Cable, Sensing range 4 mm, non-flush mountable
IFM type NN 5008 Namur
IND2004DN/US/1D/1G/2G, Inductive sensor, Connector, Sensing range 4mm, non-fl ush mountable
ATEX approval
Group II, category 1D
Group II, category 1G/2G
IFM type NN 5009 Namur
IND2004DN/1D/1G/2G, Inductive sensor, Cable, Sensing range 4mm, non-flush mountable
ATEX approval
Group II, category 1D
Group II, category 1G/2G
IFM type NN 5013 Namur
IND2004DN/BS/1D/1G/2G, Inductive sensor, Connector,Sensing range 4mm, non-flush mountable
ATEX approval
Group II, category 1D
Group II, category 1G/2G
|
|
« indietro |
